###############################################################################
#
# ICARUS VERILOG & GTKWAVE MAKEFILE
# MADE BY WILLIAM GIBB FOR HACDC
# williamgibb@gmail.com
# 
# USE THE FOLLOWING COMMANDS WITH THIS MAKEFILE
#	"make check" - compiles your verilog design - good for checking code
#	"make simulate" - compiles your design+TB & simulates your design
#	"make display" - compiles, simulates and displays waveforms
# 
###############################################################################
#
# CHANGE THESE THREE LINES FOR YOUR DESIGN
#
#TOOL INPUT
SRC = \
  vortex_tb.v \
../VX_define.v \
../interfaces/VX_branch_response_inter.v \
../interfaces/VX_csr_req_inter.v \
../interfaces/VX_csr_wb_inter.v \
../interfaces/VX_dcache_request_inter.v \
../interfaces/VX_dcache_response_inter.v \
../interfaces/VX_dram_req_rsp_inter.v \
../interfaces/VX_exec_unit_req_inter.v \
../interfaces/VX_frE_to_bckE_req_inter.v \
../interfaces/VX_gpr_clone_inter.v \
../interfaces/VX_gpr_data_inter.v \
../interfaces/VX_gpr_jal_inter.v \
../interfaces/VX_gpr_read_inter.v \
../interfaces/VX_gpr_wspawn_inter.v \
../interfaces/VX_gpu_inst_req_inter.v \
../interfaces/VX_icache_request_inter.v \
../interfaces/VX_icache_response_inter.v \
../interfaces/VX_inst_exec_wb_inter.v \
../interfaces/VX_inst_mem_wb_inter.v \
../interfaces/VX_inst_meta_inter.v \
../interfaces/VX_jal_response_inter.v \
../interfaces/VX_join_inter.v \
../interfaces/VX_lsu_req_inter.v \
../interfaces/VX_mem_req_inter.v \
../interfaces/VX_mw_wb_inter.v \
../interfaces/VX_warp_ctl_inter.v \
../interfaces/VX_wb_inter.v \
../interfaces/VX_wstall_inter.v \
../VX_alu.v \
../VX_back_end.v \
../VX_csr_handler.v \
../VX_csr_wrapper.v \
../VX_decode.v \
../VX_dmem_controller.v \
../VX_execute_unit.v \
../VX_fetch.v \
../VX_front_end.v \
../VX_generic_priority_encoder.v \
../VX_generic_register.v \
../VX_generic_stack.v \
../VX_gpgpu_inst.v \
../VX_gpr.v \
../VX_gpr_stage.v \
../VX_gpr_wrapper.v \
../VX_inst_multiplex.v \
../VX_lsu.v \
../VX_lsu_addr_gen.v \
../VX_one_counter.v \
../VX_priority_encoder.v \
../VX_priority_encoder_w_mask.v \
../VX_rename.v \
../VX_scheduler.v \
../VX_warp.v \
../VX_warp_scheduler.v \
../VX_writeback.v \
../Vortex.v \
../byte_enabled_simple_dual_port_ram.v \
../cache/VX_Cache_Bank.v \
../cache/VX_Cache_Block_DM.v \
../cache/VX_cache_bank_valid.v \
../cache/VX_cache_data.v \
../cache/VX_d_cache.v \
../cache/VX_d_cache_encapsulate.v \
../cache/VX_d_cache_tb.v \
../cache/VX_generic_pe.v \
../cache/bank.v \
../cache/cache_set.v \
../pipe_regs/VX_d_e_reg.v \
../pipe_regs/VX_f_d_reg.v \
../shared_memory/VX_bank_valids.v \
../shared_memory/VX_priority_encoder_sm.v \
../shared_memory/VX_set_bit.v \
../shared_memory/VX_shared_memory.v \
../shared_memory/VX_shared_memory_block.v


TESTBENCH = vortex_tb.v
TBOUTPUT = waves.lxt	#THIS NEEDS TO MATCH THE OUTPUT FILE
			#FROM YOUR TESTBENCH
###############################################################################
# BE CAREFUL WHEN CHANGING ITEMS BELOW THIS LINE
###############################################################################
#TOOLS
COMPILER = iverilog
SIMULATOR = vvp
VIEWER = gtkwave
#TOOL OPTIONS
COFLAGS = -v -o
SFLAGS = -v
SOUTPUT = -lxt		#SIMULATOR OUTPUT TYPE
#TOOL OUTPUT
COUTPUT = compiler.out			#COMPILER OUTPUT
###############################################################################
#MAKE DIRECTIVES
check : $(TESTBENCH) $(SRC)
	$(COMPILER) -g2012 -o vortex $(SRC) -I../ -I.

simulate: $(COUTPUT)
	$(SIMULATOR) $(SFLAGS) $(COUTPUT) $(SOUTPUT)

display: $(TBOUTPUT)
	$(VIEWER) $(TBOUTPUT) &
#MAKE DEPENDANCIES
$(TBOUTPUT): $(COUTPUT)
	$(SIMULATOR) $(SOPTIONS) $(COUTPUT) $(SOUTPUT)

$(COUTPUT): $(TESTBENCH) $(SRC)
	$(COMPILER) $(COFLAGS) $(COUTPUT) $(TESTBENCH) $(SRC)