ibuffer addition
This commit is contained in:
Blaise Tine
@@ -7,53 +7,51 @@ module VX_issue #(
|
||||
input wire reset,
|
||||
|
||||
VX_decode_if decode_if,
|
||||
VX_wb_if writeback_if,
|
||||
VX_cmt_to_issue_if cmt_to_issue_if,
|
||||
VX_writeback_if writeback_if,
|
||||
VX_csr_to_issue_if csr_to_issue_if,
|
||||
|
||||
VX_alu_req_if alu_req_if,
|
||||
VX_bru_req_if bru_req_if,
|
||||
VX_lsu_req_if lsu_req_if,
|
||||
VX_csr_req_if csr_req_if,
|
||||
VX_mul_req_if mul_req_if,
|
||||
VX_fpu_req_if fpu_req_if,
|
||||
VX_gpu_req_if gpu_req_if
|
||||
);
|
||||
|
||||
wire [`ISTAG_BITS-1:0] issue_tag;
|
||||
wire schedule_delay;
|
||||
|
||||
VX_decode_if ibuf_deq_if();
|
||||
VX_decode_if execute_if();
|
||||
VX_gpr_read_if gpr_read_if();
|
||||
assign gpr_read_if.valid = decode_if.valid && ~schedule_delay;
|
||||
assign gpr_read_if.wid = decode_if.wid;
|
||||
assign gpr_read_if.rs1 = decode_if.rs1;
|
||||
assign gpr_read_if.rs2 = decode_if.rs2;
|
||||
assign gpr_read_if.rs3 = decode_if.rs3;
|
||||
assign gpr_read_if.use_rs3 = decode_if.use_rs3;
|
||||
|
||||
wire ex_busy = (~alu_req_if.ready && (decode_if.ex_type == `EX_ALU))
|
||||
|| (~bru_req_if.ready && (decode_if.ex_type == `EX_BRU))
|
||||
|| (~lsu_req_if.ready && (decode_if.ex_type == `EX_LSU))
|
||||
|| (~csr_req_if.ready && (decode_if.ex_type == `EX_CSR))
|
||||
`ifdef EXT_M_ENABLE
|
||||
|| (~mul_req_if.ready && (decode_if.ex_type == `EX_MUL))
|
||||
`endif
|
||||
`ifdef EXT_F_ENABLE
|
||||
|| (~fpu_req_if.ready && (decode_if.ex_type == `EX_FPU))
|
||||
`endif
|
||||
|| (~gpu_req_if.ready && (decode_if.ex_type == `EX_GPU));
|
||||
wire scoreboard_delay;
|
||||
|
||||
VX_ibuffer #(
|
||||
.CORE_ID(CORE_ID)
|
||||
) ibuffer (
|
||||
.clk (clk),
|
||||
.reset (reset),
|
||||
.ibuf_enq_if (decode_if),
|
||||
.ibuf_deq_if (ibuf_deq_if),
|
||||
.freeze (~gpr_read_if.ready_in)
|
||||
);
|
||||
|
||||
VX_scoreboard #(
|
||||
.CORE_ID(CORE_ID)
|
||||
) scoreboard (
|
||||
.clk (clk),
|
||||
.reset (reset),
|
||||
.decode_if (decode_if),
|
||||
.ibuf_deq_if (ibuf_deq_if),
|
||||
.writeback_if (writeback_if),
|
||||
.cmt_to_issue_if(cmt_to_issue_if),
|
||||
.ex_busy (ex_busy),
|
||||
.issue_tag (issue_tag),
|
||||
.schedule_delay (schedule_delay)
|
||||
.exe_delay (~execute_if.ready),
|
||||
.gpr_delay (~gpr_read_if.ready_in),
|
||||
.delay (scoreboard_delay)
|
||||
);
|
||||
|
||||
assign gpr_read_if.valid = ibuf_deq_if.valid && ~scoreboard_delay;
|
||||
assign gpr_read_if.wid = ibuf_deq_if.wid;
|
||||
assign gpr_read_if.rs1 = ibuf_deq_if.rs1;
|
||||
assign gpr_read_if.rs2 = ibuf_deq_if.rs2;
|
||||
assign gpr_read_if.rs3 = ibuf_deq_if.rs3;
|
||||
assign gpr_read_if.use_rs3 = ibuf_deq_if.use_rs3;
|
||||
assign gpr_read_if.ready_out = execute_if.ready;
|
||||
|
||||
VX_gpr_stage #(
|
||||
.CORE_ID(CORE_ID)
|
||||
@@ -63,72 +61,54 @@ module VX_issue #(
|
||||
.writeback_if (writeback_if),
|
||||
.gpr_read_if (gpr_read_if)
|
||||
);
|
||||
|
||||
VX_issue_if issue_if();
|
||||
|
||||
assign issue_if.rs1_data = gpr_read_if.rs1_data;
|
||||
assign issue_if.rs2_data = gpr_read_if.rs2_data;
|
||||
assign issue_if.rs3_data = gpr_read_if.rs3_data;
|
||||
|
||||
wire [`NT_BITS-1:0] tid;
|
||||
VX_priority_encoder #(
|
||||
.N(`NUM_THREADS)
|
||||
) sel_src (
|
||||
.data_in (decode_if.thread_mask),
|
||||
.data_out (tid),
|
||||
`UNUSED_PIN (valid_out)
|
||||
);
|
||||
|
||||
wire stall = schedule_delay || ~gpr_read_if.ready;
|
||||
wire flush = stall; // clear output on stall
|
||||
|
||||
VX_generic_register #(
|
||||
.N(1 + `ISTAG_BITS + `NW_BITS + `NUM_THREADS + 32 + `NR_BITS + `NR_BITS + 32 + 1 + 1 + `EX_BITS + `OP_BITS + 1 + `FRM_BITS + `NT_BITS)
|
||||
) issue_reg (
|
||||
.clk (clk),
|
||||
.reset (reset),
|
||||
.stall (stall),
|
||||
.flush (flush),
|
||||
.in ({decode_if.valid, issue_tag, decode_if.wid, decode_if.thread_mask, decode_if.curr_PC, decode_if.rd, decode_if.rs1, decode_if.imm, decode_if.rs1_is_PC, decode_if.rs2_is_imm, decode_if.ex_type, decode_if.ex_op, decode_if.wb, decode_if.frm, tid}),
|
||||
.out ({issue_if.valid, issue_if.issue_tag, issue_if.wid, issue_if.thread_mask, issue_if.curr_PC, issue_if.rd, issue_if.rs1, issue_if.imm, issue_if.rs1_is_PC, issue_if.rs2_is_imm, issue_if.ex_type, issue_if.ex_op, issue_if.wb, issue_if.frm, issue_if.tid})
|
||||
);
|
||||
|
||||
assign decode_if.ready = issue_if.ready;
|
||||
assign issue_if.ready = ~stall;
|
||||
|
||||
VX_issue_demux issue_demux (
|
||||
.issue_if (issue_if),
|
||||
.alu_req_if (alu_req_if),
|
||||
.bru_req_if (bru_req_if),
|
||||
.lsu_req_if (lsu_req_if),
|
||||
.csr_req_if (csr_req_if),
|
||||
.mul_req_if (mul_req_if),
|
||||
.fpu_req_if (fpu_req_if),
|
||||
.gpu_req_if (gpu_req_if)
|
||||
);
|
||||
assign execute_if.valid = ibuf_deq_if.valid && gpr_read_if.ready_in && ~scoreboard_delay;
|
||||
assign execute_if.wid = ibuf_deq_if.wid;
|
||||
assign execute_if.thread_mask = ibuf_deq_if.thread_mask;
|
||||
assign execute_if.curr_PC = ibuf_deq_if.curr_PC;
|
||||
assign execute_if.ex_type = ibuf_deq_if.ex_type;
|
||||
assign execute_if.ex_op = ibuf_deq_if.ex_op;
|
||||
assign execute_if.frm = ibuf_deq_if.frm;
|
||||
assign execute_if.wb = ibuf_deq_if.wb;
|
||||
assign execute_if.rd = ibuf_deq_if.rd;
|
||||
assign execute_if.rs1 = ibuf_deq_if.rs1;
|
||||
assign execute_if.imm = ibuf_deq_if.imm;
|
||||
assign execute_if.rs1_is_PC = ibuf_deq_if.rs1_is_PC;
|
||||
assign execute_if.rs2_is_imm = ibuf_deq_if.rs2_is_imm;
|
||||
|
||||
VX_instr_demux instr_demux (
|
||||
.clk (clk),
|
||||
.reset (reset),
|
||||
.execute_if (execute_if),
|
||||
.gpr_read_if (gpr_read_if),
|
||||
.csr_to_issue_if(csr_to_issue_if),
|
||||
.alu_req_if (alu_req_if),
|
||||
.lsu_req_if (lsu_req_if),
|
||||
.csr_req_if (csr_req_if),
|
||||
.mul_req_if (mul_req_if),
|
||||
.fpu_req_if (fpu_req_if),
|
||||
.gpu_req_if (gpu_req_if)
|
||||
);
|
||||
|
||||
`ifdef DBG_PRINT_PIPELINE
|
||||
always @(posedge clk) begin
|
||||
if (alu_req_if.valid && alu_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=ALU, istag=%0d, tmask=%b, rs1_data=%0h, rs2_data=%0h", $time, CORE_ID, alu_req_if.wid, alu_req_if.curr_PC, alu_req_if.issue_tag, alu_req_if.thread_mask, alu_req_if.rs1_data, alu_req_if.rs2_data);
|
||||
end
|
||||
if (bru_req_if.valid && bru_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=BRU, istag=%0d, tmask=%b, rs1_data=%0h, rs2_data=%0h, offset=%0h", $time, CORE_ID, bru_req_if.wid, bru_req_if.curr_PC, bru_req_if.issue_tag, bru_req_if.thread_mask, bru_req_if.rs1_data, bru_req_if.rs2_data, bru_req_if.offset);
|
||||
$display("%t: core%0d-issue: wid=%0d, PC=%0h, ex=ALU, tmask=%b, rs1_data=%0h, rs2_data=%0h", $time, CORE_ID, alu_req_if.wid, alu_req_if.curr_PC, alu_req_if.thread_mask, alu_req_if.rs1_data, alu_req_if.rs2_data);
|
||||
end
|
||||
if (lsu_req_if.valid && lsu_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=LSU, istag=%0d, tmask=%b, rw=%b, byteen=%b, baddr=%0h, offset=%0h, data=%0h", $time, CORE_ID, lsu_req_if.wid, lsu_req_if.curr_PC, lsu_req_if.issue_tag, lsu_req_if.thread_mask, lsu_req_if.rw, lsu_req_if.byteen, lsu_req_if.base_addr, lsu_req_if.offset, lsu_req_if.store_data);
|
||||
$display("%t: core%0d-issue: wid=%0d, PC=%0h, ex=LSU, tmask=%b, rw=%b, byteen=%b, baddr=%0h, offset=%0h, data=%0h", $time, CORE_ID, lsu_req_if.wid, lsu_req_if.curr_PC, lsu_req_if.thread_mask, lsu_req_if.rw, lsu_req_if.byteen, lsu_req_if.base_addr, lsu_req_if.offset, lsu_req_if.store_data);
|
||||
end
|
||||
if (csr_req_if.valid && csr_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=CSR, istag=%0d, tmask=%b, addr=%0h, mask=%0h", $time, CORE_ID, csr_req_if.wid, csr_req_if.curr_PC, csr_req_if.issue_tag, csr_req_if.thread_mask, csr_req_if.csr_addr, csr_req_if.csr_mask);
|
||||
$display("%t: core%0d-issue: wid=%0d, PC=%0h, ex=CSR, tmask=%b, addr=%0h, mask=%0h", $time, CORE_ID, csr_req_if.wid, csr_req_if.curr_PC, csr_req_if.thread_mask, csr_req_if.csr_addr, csr_req_if.csr_mask);
|
||||
end
|
||||
if (mul_req_if.valid && mul_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=MUL, istag=%0d, tmask=%b, rs1_data=%0h, rs2_data=%0h", $time, CORE_ID, mul_req_if.wid, mul_req_if.curr_PC, mul_req_if.issue_tag, mul_req_if.thread_mask, mul_req_if.rs1_data, mul_req_if.rs2_data);
|
||||
$display("%t: core%0d-issue: wid=%0d, PC=%0h, ex=MUL, tmask=%b, rs1_data=%0h, rs2_data=%0h", $time, CORE_ID, mul_req_if.wid, mul_req_if.curr_PC, mul_req_if.thread_mask, mul_req_if.rs1_data, mul_req_if.rs2_data);
|
||||
end
|
||||
if (fpu_req_if.valid && fpu_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=FPU, istag=%0d, tmask=%b, rs1_data=%0h, rs2_data=%0h, rs3_data=%0h", $time, CORE_ID, fpu_req_if.wid, fpu_req_if.curr_PC, fpu_req_if.issue_tag, fpu_req_if.thread_mask, fpu_req_if.rs1_data, fpu_req_if.rs2_data, fpu_req_if.rs3_data);
|
||||
$display("%t: core%0d-issue: wid=%0d, PC=%0h, ex=FPU, tmask=%b, rs1_data=%0h, rs2_data=%0h, rs3_data=%0h", $time, CORE_ID, fpu_req_if.wid, fpu_req_if.curr_PC, fpu_req_if.thread_mask, fpu_req_if.rs1_data, fpu_req_if.rs2_data, fpu_req_if.rs3_data);
|
||||
end
|
||||
if (gpu_req_if.valid && gpu_req_if.ready) begin
|
||||
$display("%t: Core%0d-issue: wid=%0d, PC=%0h, ex=GPU, istag=%0d, tmask=%b, rs1_data=%0h, rs2_data=%0h", $time, CORE_ID, gpu_req_if.wid, gpu_req_if.curr_PC, gpu_req_if.issue_tag, gpu_req_if.thread_mask, gpu_req_if.rs1_data, gpu_req_if.rs2_data);
|
||||
$display("%t: core%0d-issue: wid=%0d, PC=%0h, ex=GPU, tmask=%b, rs1_data=%0h, rs2_data=%0h", $time, CORE_ID, gpu_req_if.wid, gpu_req_if.curr_PC, gpu_req_if.thread_mask, gpu_req_if.rs1_data, gpu_req_if.rs2_data);
|
||||
end
|
||||
end
|
||||
`endif
|
||||
|
||||
Reference in New Issue
Block a user