diff --git a/.circleci/README.md b/.circleci/README.md
deleted file mode 100644
index 0c53405d..00000000
--- a/.circleci/README.md
+++ /dev/null
@@ -1,75 +0,0 @@
-Chipyard CI
-===========
-
-Website: https://circleci.com/gh/ucb-bar/chipyard
-
-CircleCI Brief Explanation
----------------------------
-
-CircleCI is controlled by the `config.yml` script.
-It consists of a *workflow* which has a series of *jobs* within it that do particular tasks.
-All jobs in the workflow must pass for the CI run to be successful.
-
-At the bottom of the `config.yml` there is a `workflows:` section that specifies the order in which the jobs of the workflow should run.
-For example:
-
-    - prepare-rocketchip:
-        requires:
-            - install-riscv-toolchain
-
-This specifies that the `prepare-rocketchip` job needs the `install-riscv-toolchain` steps to run before it can run.
-
-All jobs in the CI workflow are specified at the top of `config.yml`
-They specify a docker image to use (in this case a riscv-boom image since that is already available and works nicely) and an environment.
-Finally, in the `steps:` section, the steps are run sequentially and state persists throughout a job.
-So when you run something like `checkout` the next step has the checked out code.
-Caching in the job is done by giving a file to cache on.
-`restore_cache:` loads the cache into the environment if the key matches while `save_cache:` writes to the cache with the key IF IT IS NOT PRESENT.
-Note, if the cache is already present for that key, the write to it is ignored.
-Here the key is built from a string where the `checksum` portion converts the file given into a hash.
-
-.circleci directory
--------------------
-
-This directory contains all the collateral for the Chipyard CI to work.
-The following is included:
-
-    `build-toolchains.sh`        # build either riscv-tools or esp-tools
-    `create-hash.sh`             # create hashes of riscv-tools/esp-tools so circleci caching can work
-    `do-rtl-build.sh`            # use verilator to build a sim executable (remotely)
-    `config.yml`                 # main circleci config script to enumerate jobs/workflows
-    `defaults.sh`                # default variables used
-    `check-commit.sh`            # check that submodule commits are valid
-    `build-extra-tests.sh`       # build default chipyard tests located in tests/
-    `clean-old-files.sh`         # clean up build server files
-    `do-fpga-rtl-build.sh`       # similar to `do-rtl-build` but using fpga/
-    `install-verilator.sh`       # install verilator on build server
-    `run-firesim-scala-tests.sh` # run firesim scala tests
-    `run-tests.sh                # run tests for a specific set of designs
-    `images/`                    # docker image used in CI
-
-How things are setup for Chipyard
----------------------------------
-
-The steps for CI to run are as follows.
-1st, build the toolchains in parallel (note: `esp-tools` is currently not used in the run).
-The docker image sets up the `PATH` and `RISCV` variable so that `riscv-tools` is the default (currently the `env.sh` script that is created at tool build is unused).
-2nd, create the simulator binary.
-This requires the `riscv-tools` for `fesvr` and `verilator` to be able to build the binary.
-This stores all collateral for the tests (srcs, generated-srcs, sim binary, etc) to run "out of the gate" in the next job (make needs everything or else it will run again).
-3rd, finally run the desired tests.
-
-Other CI Setup
---------------
-
-To get the CI to work correctly you need to setup CircleCI environment variables to point to the remote directory to build files and the server user/ip.
-In the project settings, you can find this under "Build Settings" "Environment Variables".
-You need to add two variables like the following:
-
-CI\_DIR = /path/to/where/you/want/to/store/remote/files
-SERVER = username@myserver.coolmachine.berkeley.edu
-
-Additionally, you need to add under the "PERMISSIONS" "SSH Permissions" section a private key that is on the build server that you are using.
-After adding a private key, it will show a fingerprint that should be added under the jobs that need to be run.
-
-Note: On the remote server you need to have the `*.pub` key file added to the `authorized_keys` file.
diff --git a/.circleci/build-extra-tests.sh b/.circleci/build-extra-tests.sh
deleted file mode 100755
index e38b50fe..00000000
--- a/.circleci/build-extra-tests.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# turn echo on and error on earliest command
-set -ex
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-make -C $LOCAL_CHIPYARD_DIR/tests clean
-make -C $LOCAL_CHIPYARD_DIR/tests
diff --git a/.circleci/build-toolchains.sh b/.circleci/build-toolchains.sh
deleted file mode 100755
index 160b6f5a..00000000
--- a/.circleci/build-toolchains.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/bash
-
-# create the riscv tools/esp tools binaries
-# passed in as <riscv-tools or esp-tools>
-
-# turn echo on and error on earliest command
-set -ex
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-if [ ! -d "$HOME/$1-install" ]; then
-    cd $HOME
-
-    # init all submodules including the tools
-    CHIPYARD_DIR="$LOCAL_CHIPYARD_DIR" NPROC=$CI_MAKE_NPROC $LOCAL_CHIPYARD_DIR/scripts/build-toolchains.sh $1
-fi
diff --git a/.circleci/check-commit.sh b/.circleci/check-commit.sh
deleted file mode 100755
index b52ff337..00000000
--- a/.circleci/check-commit.sh
+++ /dev/null
@@ -1,152 +0,0 @@
-#!/bin/bash
-
-# check to see that submodule commits are present on the master branch
-
-# turn echo on and error on earliest command
-set -ex
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-# enter bhd repo
-cd $LOCAL_CHIPYARD_DIR
-
-# ignore the private vlsi submodules
-git config submodule.vlsi/hammer-cadence-plugins.update none
-git config submodule.vlsi/hammer-mentor-plugins.update none
-git config submodule.vlsi/hammer-synopsys-plugins.update none
-
-# initialize submodules and get the hashes
-git submodule update --init
-status=$(git submodule status)
-
-all_names=()
-
-
-search_submodule() {
-    echo "Running check on submodule $submodule in $dir"
-    hash=$(echo "$status" | grep "$dir.*$submodule " | awk '{print$1}' | grep -o "[[:alnum:]]*")
-    for branch in "${branches[@]}"
-    do
-        echo "Searching for $hash in origin/$branch of $submodule"
-        (git -C $dir/$submodule branch -r --contains "$hash" | grep "origin/$branch") && true # needs init'ed submodules
-        if [ $? -eq 0 ]
-        then
-            all_names+=("$dir/$submodule $hash 0")
-            return
-        fi
-    done
-    all_names+=("$dir/$submodule $hash 1")
-    return
-}
-
-search () {
-    for submodule in "${submodules[@]}"
-    do
-        search_submodule
-    done
-}
-
-submodules=("cva6" "boom" "ibex" "gemmini" "hwacha" "icenet" "nvdla" "rocket-chip" "sha3" "sifive-blocks" "sifive-cache" "testchipip" "riscv-sodor")
-dir="generators"
-if [ "$CIRCLE_BRANCH" == "master" ] || [ "$CIRCLE_BRANCH" == "dev" ]
-then
-    branches=("master" "main")
-else
-    branches=("master" "main" "dev")
-fi
-search
-
-submodules=("riscv-gnu-toolchain" "riscv-isa-sim" "riscv-pk" "riscv-tests")
-dir="toolchains/esp-tools"
-branches=("master")
-search
-
-
-submodules=("riscv-gnu-toolchain" "riscv-isa-sim" "riscv-pk" "riscv-tests")
-dir="toolchains/riscv-tools"
-branches=("master")
-search
-
-# riscv-openocd doesn't use its master branch
-submodules=("riscv-openocd")
-dir="toolchains/riscv-tools"
-branches=("riscv")
-search
-
-submodules=("qemu" "libgloss")
-dir="toolchains"
-branches=("master")
-search
-
-submodules=("coremark" "firemarshal" "nvdla-workload" "spec2017")
-dir="software"
-if [ "$CIRCLE_BRANCH" == "master" ] || [ "$CIRCLE_BRANCH" == "dev" ]
-then
-    branches=("master")
-else
-    branches=("master" "dev")
-fi
-search
-
-submodules=("DRAMSim2" "axe" "barstools" "chisel-testers" "dsptools" "rocket-dsp-utils" "firrtl-interpreter" "torture" "treadle")
-dir="tools"
-if [ "$CIRCLE_BRANCH" == "master" ] || [ "$CIRCLE_BRANCH" == "dev" ]
-then
-    branches=("master")
-else
-    branches=("master" "dev")
-fi
-search
-
-submodules=("dromajo-src")
-dir="tools/dromajo"
-branches=("master")
-search
-
-submodules=("firesim")
-dir="sims"
-if [ "$CIRCLE_BRANCH" == "master" ] || [ "$CIRCLE_BRANCH" == "dev" ]
-then
-    branches=("master")
-else
-    branches=("master" "dev")
-fi
-search
-
-submodules=("hammer")
-dir="vlsi"
-branches=("master")
-search
-
-submodules=("fpga-shells")
-dir="fpga"
-branches=("master")
-search
-
-# turn off verbose printing to make this easier to read
-set +x
-
-# print 0's
-for str in "${all_names[@]}";
-do
-    if [ 0 = $(echo "$str" | awk '{print$3}') ]; then
-        echo "$str"
-    fi
-done
-
-echo ""
-
-# check if there was a non-zero return code and print 1's
-EXIT=0
-for str in "${all_names[@]}";
-do
-    if [ ! 0 = $(echo "$str" | awk '{print$3}') ]; then
-        echo "$str"
-        EXIT=1
-    fi
-done
-
-echo "Done checking all submodules"
-exit $EXIT
diff --git a/.circleci/clean-old-files.sh b/.circleci/clean-old-files.sh
deleted file mode 100755
index 5824c4b7..00000000
--- a/.circleci/clean-old-files.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/bash
-
-# clean directories that are older than 14 days
-# argument is used as the directory to look in
-
-age () {
-	local AGE_SEC
-	local CUR_SEC
-	local DIFF_SEC
-	local SEC_PER_DAY
-
-	SEC_PER_DAY=86400
-
-	CUR_SEC=$(date +%s)
-	AGE_SEC=$(stat -c %Y -- "$1")
-	DIFF_SEC=$(expr $CUR_SEC - $AGE_SEC)
-
-	echo $(expr $DIFF_SEC / $SEC_PER_DAY)
-}
-
-for d in $1/*/ ; do
-	DIR_AGE="$(age $d)"
-	if [ $DIR_AGE -ge 14 ]; then
-		echo "Deleting $d since is it $DIR_AGE old"
-		rm -rf $d
-	else
-	    echo "Keep $d since it is $DIR_AGE old"
-	fi
-done
diff --git a/.circleci/config.yml b/.circleci/config.yml
deleted file mode 100644
index ec59d8ca..00000000
--- a/.circleci/config.yml
+++ /dev/null
@@ -1,534 +0,0 @@
-# CircleCI Configuration File
-
-# version of circleci
-version: 2.1
-
-parameters:
-    tools-cache-version:
-        type: string
-        default: "v13"
-
-# default execution env.s
-executors:
-    main-env:
-        docker:
-            - image: ucbbar/chipyard-ci-image:554b436
-        environment:
-            JVM_OPTS: -Xmx3200m # Customize the JVM maximum heap limit
-
-# re-usable commands
-commands:
-    toolchain-build:
-        description: "Build a toolchain"
-        parameters:
-            tools-version:
-                type: string
-                default: "riscv-tools"
-        steps:
-            - checkout
-            - run:
-                name: Create hash of toolchains
-                command: |
-                    .circleci/create-hash.sh
-            - restore_cache:
-                keys:
-                    - << parameters.tools-version >>-installed-<< pipeline.parameters.tools-cache-version >>-{{ checksum "../<< parameters.tools-version >>.hash" }}
-            - run:
-                name: Building << parameters.tools-version >>
-                command: |
-                    .circleci/build-toolchains.sh << parameters.tools-version >>
-                no_output_timeout: 120m
-            - save_cache:
-                key: << parameters.tools-version >>-installed-<< pipeline.parameters.tools-cache-version >>-{{ checksum "../<< parameters.tools-version >>.hash" }}
-                paths:
-                    - "/root/<< parameters.tools-version >>-install"
-
-    ssh-checkout:
-        description: "Add SSH key and checkout code"
-        steps:
-            - add_ssh_keys:
-                fingerprints:
-                    - "3e:c3:02:5b:ed:64:8c:b7:b0:04:43:bc:83:43:73:1e"
-                    - "32:d6:89:d2:97:fa:db:de:a8:2d:2a:f2:70:dd:80:89"
-            - checkout
-
-    setup-tools:
-        description: "Get toolchain"
-        parameters:
-            tools-version:
-                type: string
-                default: "riscv-tools"
-        steps:
-            - ssh-checkout
-            - run:
-                name: Create hash of toolchains
-                command: |
-                    .circleci/create-hash.sh
-            - restore_cache:
-                keys:
-                    - << parameters.tools-version >>-installed-<< pipeline.parameters.tools-cache-version >>-{{ checksum "../<< parameters.tools-version >>.hash" }}
-
-    prepare-rtl:
-        description: "Run the prepare step of RTL"
-        parameters:
-            tools-version:
-                type: string
-                default: "riscv-tools"
-            group-key:
-                type: string
-            timeout:
-                type: string
-                default: "120m"
-            build-script:
-                type: string
-                default: "do-rtl-build.sh"
-            build-type:
-                type: string
-                default: "sim"
-        steps:
-            - setup-tools:
-                tools-version: "<< parameters.tools-version >>"
-            - run:
-                name: Building << parameters.group-key >> subproject using Verilator
-                command: .circleci/<< parameters.build-script >> << parameters.group-key >> << parameters.build-type >>
-                no_output_timeout: << parameters.timeout >>
-            - save_cache:
-                key: << parameters.group-key >>-{{ .Branch }}-{{ .Revision }}
-                paths:
-                    - "/root/project"
-
-    run-tests:
-        description: "Run a set of tests"
-        parameters:
-            tools-version:
-                type: string
-                default: "riscv-tools"
-            group-key:
-                type: string
-            project-key:
-                type: string
-            run-script:
-                type: string
-                default: "run-tests.sh"
-            timeout:
-                type: string
-                default: "25m"
-        steps:
-            - setup-tools:
-                tools-version: "<< parameters.tools-version >>"
-            - restore_cache:
-                keys:
-                    - << parameters.group-key >>-{{ .Branch }}-{{ .Revision }}
-            - run:
-                name: Run << parameters.project-key >> subproject tests
-                command: .circleci/<< parameters.run-script >> << parameters.project-key >>
-                no_output_timeout: << parameters.timeout >>
-
-# set of jobs to run
-jobs:
-    commit-on-master-check:
-        executor: main-env
-        steps:
-            - checkout
-            - run:
-                name: Check commits of each submodule
-                command: |
-                    .circleci/check-commit.sh
-    tutorial-setup-check:
-        executor: main-env
-        steps:
-            - checkout
-            - run:
-                name: Check that the tutorial-setup patches apply
-                command: |
-                    scripts/tutorial-setup.sh
-    documentation-check:
-        executor: main-env
-        steps:
-            - checkout
-            - run:
-                name: Check that documentation builds with no warnings/errors
-                command: |
-                    sudo apt-get update -y
-                    sudo apt-get install -y python3-pip
-                    sudo pip3 install -r docs/requirements.txt
-                    make -C docs html
-
-    install-riscv-toolchain:
-        executor: main-env
-        steps:
-            - toolchain-build:
-                tools-version: "riscv-tools"
-    install-esp-toolchain:
-        executor: main-env
-        steps:
-            - toolchain-build:
-                tools-version: "esp-tools"
-    install-verilator:
-        executor: main-env
-        steps:
-            - ssh-checkout
-            - run:
-                name: Install Verilator to remote
-                command: |
-                    .circleci/install-verilator.sh
-    build-extra-tests:
-        executor: main-env
-        steps:
-            - ssh-checkout
-            - run:
-                name: Create hash of toolchains
-                command: |
-                    .circleci/create-hash.sh
-            - restore_cache:
-                keys:
-                    - riscv-tools-installed-<< pipeline.parameters.tools-cache-version >>-{{ checksum "../riscv-tools.hash" }}
-            - run:
-                name: Build extra tests
-                command: .circleci/build-extra-tests.sh
-                no_output_timeout: 120m
-            - save_cache:
-                key: extra-tests-{{ .Branch }}-{{ .Revision }}
-                paths:
-                    - "/root/project/tests"
-
-    prepare-chipyard-cores:
-        executor: main-env
-        steps:
-            - prepare-rtl:
-                group-key: "group-cores"
-    prepare-chipyard-peripherals:
-        executor: main-env
-        steps:
-            - prepare-rtl:
-                group-key: "group-peripherals"
-    prepare-chipyard-accels:
-        executor: main-env
-        steps:
-            - prepare-rtl:
-                tools-version: "esp-tools"
-                group-key: "group-accels"
-    prepare-chipyard-tracegen:
-        executor: main-env
-        steps:
-            - prepare-rtl:
-                group-key: "group-tracegen"
-    prepare-chipyard-other:
-        executor: main-env
-        steps:
-            - prepare-rtl:
-                group-key: "group-other"
-
-    chipyard-rocket-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-rocket"
-    chipyard-hetero-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-hetero"
-                timeout: "20m"
-    chipyard-boom-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-boom"
-    chipyard-cva6-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-cva6"
-                timeout: "30m"
-    chipyard-sodor-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-sodor"
-                timeout: "30m"
-    chipyard-ibex-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-ibex"
-                timeout: "30m"
-    chipyard-multiclock-rocket-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-cores"
-                project-key: "chipyard-multiclock-rocket"
-    chipyard-dmirocket-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-peripherals"
-                project-key: "chipyard-dmirocket"
-    chipyard-spiflashwrite-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-peripherals"
-                project-key: "chipyard-spiflashwrite"
-    chipyard-spiflashread-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-peripherals"
-                project-key: "chipyard-spiflashread"
-    chipyard-lbwif-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-peripherals"
-                project-key: "chipyard-lbwif"
-
-    chipyard-sha3-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                tools-version: "esp-tools"
-                group-key: "group-accels"
-                project-key: "chipyard-sha3"
-    chipyard-streaming-fir-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-accels"
-                project-key: "chipyard-streaming-fir"
-    chipyard-streaming-passthrough-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-accels"
-                project-key: "chipyard-streaming-passthrough"
-    chipyard-hwacha-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                tools-version: "esp-tools"
-                group-key: "group-accels"
-                project-key: "chipyard-hwacha"
-                timeout: "60m"
-    chipyard-gemmini-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                tools-version: "esp-tools"
-                group-key: "group-accels"
-                project-key: "chipyard-gemmini"
-    chipyard-nvdla-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-accels"
-                project-key: "chipyard-nvdla"
-    tracegen-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-tracegen"
-                project-key: "tracegen"
-    tracegen-boom-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-tracegen"
-                project-key: "tracegen-boom"
-    icenet-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-other"
-                project-key: "icenet"
-                timeout: "30m"
-    testchipip-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "group-other"
-                project-key: "testchipip"
-                timeout: "30m"
-    firesim-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "extra-tests"
-                project-key: "firesim"
-                run-script: "run-firesim-scala-tests.sh"
-                timeout: "20m"
-    fireboom-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "extra-tests"
-                project-key: "fireboom"
-                run-script: "run-firesim-scala-tests.sh"
-                timeout: "45m"
-    firesim-multiclock-run-tests:
-        executor: main-env
-        steps:
-            - run-tests:
-                group-key: "extra-tests"
-                project-key: "firesim-multiclock"
-                run-script: "run-firesim-scala-tests.sh"
-                timeout: "20m"
-    prepare-chipyard-fpga:
-        executor: main-env
-        steps:
-            - prepare-rtl:
-                group-key: "group-fpga"
-                build-type: "fpga"
-
-# Order and dependencies of jobs to run
-workflows:
-    version: 2
-    submodules-on-master:
-        jobs:
-            # Check to make sure submodule commits are on master branches
-            - commit-on-master-check
-        triggers:
-            - schedule:
-                cron: "0 0 * * *"
-                filters:
-                    branches:
-                        only:
-                            - master
-
-    build-and-test-chipyard-integration:
-        jobs:
-            # Make the toolchains
-            - install-riscv-toolchain
-
-            - install-esp-toolchain
-
-            - install-verilator
-
-            - commit-on-master-check
-
-            # Attempt to apply the tutorial patches
-            - tutorial-setup-check
-
-            # Check that documentation builds
-            - documentation-check
-
-            # Build extra tests
-            - build-extra-tests:
-                requires:
-                    - install-riscv-toolchain
-
-            # Prepare the verilator builds
-            - prepare-chipyard-cores:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-            - prepare-chipyard-peripherals:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-            - prepare-chipyard-accels:
-                requires:
-                    - install-esp-toolchain
-                    - install-verilator
-            - prepare-chipyard-tracegen:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-            - prepare-chipyard-other:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-
-            # Run the example tests
-            - chipyard-rocket-run-tests:
-                requires:
-                    - prepare-chipyard-cores
-            - chipyard-hetero-run-tests:
-                requires:
-                    - prepare-chipyard-cores
-            - chipyard-boom-run-tests:
-                requires:
-                    - prepare-chipyard-cores
-            - chipyard-cva6-run-tests:
-                requires:
-                    - prepare-chipyard-cores
-            - chipyard-sodor-run-tests:
-                requires:
-                    - prepare-chipyard-cores
-            - chipyard-ibex-run-tests:
-                requires:
-                    - prepare-chipyard-cores
-            - chipyard-dmirocket-run-tests:
-                requires:
-                    - prepare-chipyard-peripherals
-            - chipyard-spiflashwrite-run-tests:
-                requires:
-                    - prepare-chipyard-peripherals
-            - chipyard-spiflashread-run-tests:
-                requires:
-                    - prepare-chipyard-peripherals
-            - chipyard-lbwif-run-tests:
-                requires:
-                    - prepare-chipyard-peripherals
-
-            - chipyard-sha3-run-tests:
-                requires:
-                    - prepare-chipyard-accels
-            - chipyard-streaming-fir-run-tests:
-                requires:
-                    - prepare-chipyard-accels
-            - chipyard-streaming-passthrough-run-tests:
-                requires:
-                    - prepare-chipyard-accels
-            - chipyard-hwacha-run-tests:
-                requires:
-                    - prepare-chipyard-accels
-            - chipyard-gemmini-run-tests:
-                requires:
-                    - prepare-chipyard-accels
-            - chipyard-nvdla-run-tests:
-                requires:
-                    - prepare-chipyard-accels
-
-            - tracegen-run-tests:
-                requires:
-                    - prepare-chipyard-tracegen
-            - tracegen-boom-run-tests:
-                requires:
-                    - prepare-chipyard-tracegen
-
-            - icenet-run-tests:
-                requires:
-                    - prepare-chipyard-other
-            - testchipip-run-tests:
-                requires:
-                    - prepare-chipyard-other
-
-            # Run the firesim tests
-            - firesim-run-tests:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-                    - build-extra-tests
-            - firesim-multiclock-run-tests:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-                    - build-extra-tests
-            - fireboom-run-tests:
-                requires:
-                    - install-riscv-toolchain
-                    - install-verilator
-                    - build-extra-tests
-
-            # Prepare the fpga builds (just Verilog)
-            - prepare-chipyard-fpga:
-                requires:
-                    - install-riscv-toolchain
diff --git a/.circleci/create-hash.sh b/.circleci/create-hash.sh
deleted file mode 100755
index 7a8915a5..00000000
--- a/.circleci/create-hash.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# get the hash of riscv-tools
-
-# turn echo on and error on earliest command
-set -ex
-set -o pipefail
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-# enter bhd repo
-cd $LOCAL_CHIPYARD_DIR
-
-# Use normalized output of git-submodule status as hashfile
-for tools in 'riscv-tools' 'esp-tools' ; do
-    git submodule status "toolchains/${tools}" 'toolchains/libgloss' 'toolchains/qemu' |
-    while read -r line ; do
-        echo "${line#[!0-9a-f]}"
-    done > "${HOME}/${tools}.hash"
-done
-echo "Hashfile for riscv-tools and esp-tools created in $HOME"
diff --git a/.circleci/defaults.sh b/.circleci/defaults.sh
deleted file mode 100755
index 2ff81ef1..00000000
--- a/.circleci/defaults.sh
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-
-copy () {
-    rsync -avzp -e 'ssh' --exclude '.git' $1 $2
-}
-
-run () {
-    ssh -o "StrictHostKeyChecking no" -t $SERVER $@
-}
-
-run_script () {
-    ssh -o "StrictHostKeyChecking no" -t $SERVER 'bash -s' < $1 "$2"
-}
-
-clean () {
-    # remove remote work dir
-    run "rm -rf $REMOTE_WORK_DIR"
-}
-
-# make parallelism
-CI_MAKE_NPROC=8
-# chosen based on a 24c system shared with 1 other project
-REMOTE_MAKE_NPROC=4
-
-# verilator version
-VERILATOR_VERSION=v4.034
-
-# remote variables
-REMOTE_PREFIX=$CI_DIR/$CIRCLE_PROJECT_REPONAME-$CIRCLE_BRANCH
-REMOTE_WORK_DIR=$REMOTE_PREFIX-$CIRCLE_SHA1-$CIRCLE_JOB
-REMOTE_RISCV_DIR=$REMOTE_WORK_DIR/riscv-tools-install
-REMOTE_ESP_DIR=$REMOTE_WORK_DIR/esp-tools-install
-REMOTE_CHIPYARD_DIR=$REMOTE_WORK_DIR/chipyard
-REMOTE_SIM_DIR=$REMOTE_CHIPYARD_DIR/sims/verilator
-REMOTE_FIRESIM_DIR=$REMOTE_CHIPYARD_DIR/sims/firesim/sim
-REMOTE_FPGA_DIR=$REMOTE_CHIPYARD_DIR/fpga
-REMOTE_JAVA_OPTS="-Xmx10G -Xss8M"
-# Disable the supershell to greatly improve the readability of SBT output when captured by Circle CI
-REMOTE_SBT_OPTS="-Dsbt.ivy.home=$REMOTE_WORK_DIR/.ivy2 -Dsbt.supershell=false -Dsbt.global.base=$REMOTE_WORK_DIR/.sbt -Dsbt.boot.directory=$REMOTE_WORK_DIR/.sbt/boot"
-REMOTE_VERILATOR_DIR=$REMOTE_PREFIX-$CIRCLE_SHA1-verilator-install
-
-# local variables (aka within the docker container)
-LOCAL_CHECKOUT_DIR=$HOME/project
-LOCAL_RISCV_DIR=$HOME/riscv-tools-install
-LOCAL_ESP_DIR=$HOME/esp-tools-install
-LOCAL_CHIPYARD_DIR=$LOCAL_CHECKOUT_DIR
-LOCAL_SIM_DIR=$LOCAL_CHIPYARD_DIR/sims/verilator
-LOCAL_FIRESIM_DIR=$LOCAL_CHIPYARD_DIR/sims/firesim/sim
-
-# key value store to get the build groups
-declare -A grouping
-grouping["group-cores"]="chipyard-cva6 chipyard-ibex chipyard-rocket chipyard-hetero chipyard-boom chipyard-sodor chipyard-digitaltop chipyard-multiclock-rocket chipyard-nomem-scratchpad chipyard-fftgenerator"
-grouping["group-peripherals"]="chipyard-dmirocket chipyard-blkdev chipyard-spiflashread chipyard-spiflashwrite chipyard-mmios chipyard-lbwif"
-grouping["group-accels"]="chipyard-nvdla chipyard-sha3 chipyard-hwacha chipyard-gemmini chipyard-streaming-fir chipyard-streaming-passthrough"
-grouping["group-tracegen"]="tracegen tracegen-boom"
-grouping["group-other"]="icenet testchipip"
-grouping["group-fpga"]="arty vcu118"
-
-# key value store to get the build strings
-declare -A mapping
-mapping["chipyard-rocket"]=""
-mapping["chipyard-dmirocket"]=" CONFIG=dmiRocketConfig"
-mapping["chipyard-lbwif"]=" CONFIG=LBWIFRocketConfig"
-mapping["chipyard-sha3"]=" CONFIG=Sha3RocketConfig"
-mapping["chipyard-digitaltop"]=" TOP=DigitalTop"
-mapping["chipyard-streaming-fir"]=" CONFIG=StreamingFIRRocketConfig"
-mapping["chipyard-streaming-passthrough"]=" CONFIG=StreamingPassthroughRocketConfig"
-mapping["chipyard-hetero"]=" CONFIG=LargeBoomAndRocketConfig"
-mapping["chipyard-boom"]=" CONFIG=SmallBoomConfig"
-mapping["chipyard-blkdev"]=" CONFIG=SimBlockDeviceRocketConfig"
-mapping["chipyard-hwacha"]=" CONFIG=HwachaRocketConfig"
-mapping["chipyard-gemmini"]=" CONFIG=GemminiRocketConfig"
-mapping["chipyard-cva6"]=" CONFIG=CVA6Config"
-mapping["chipyard-ibex"]=" CONFIG=IbexConfig"
-mapping["chipyard-spiflashread"]=" CONFIG=LargeSPIFlashROMRocketConfig"
-mapping["chipyard-spiflashwrite"]=" CONFIG=SmallSPIFlashRocketConfig"
-mapping["chipyard-mmios"]=" CONFIG=MMIORocketConfig verilog"
-mapping["tracegen"]=" CONFIG=NonBlockingTraceGenL2Config"
-mapping["tracegen-boom"]=" CONFIG=BoomTraceGenConfig"
-mapping["chipyard-nvdla"]=" CONFIG=SmallNVDLARocketConfig"
-mapping["chipyard-sodor"]=" CONFIG=Sodor5StageConfig"
-mapping["chipyard-multiclock-rocket"]=" CONFIG=MulticlockRocketConfig"
-mapping["chipyard-nomem-scratchpad"]="  CONFIG=MMIOScratchpadOnlyRocketConfig"
-mapping["chipyard-fftgenerator"]=" CONFIG=FFTRocketConfig"
-
-mapping["firesim"]="SCALA_TEST=firesim.firesim.RocketNICF1Tests"
-mapping["firesim-multiclock"]="SCALA_TEST=firesim.firesim.RocketMulticlockF1Tests"
-mapping["fireboom"]="SCALA_TEST=firesim.firesim.BoomF1Tests"
-mapping["icenet"]="SUB_PROJECT=icenet"
-mapping["testchipip"]="SUB_PROJECT=testchipip"
-
-mapping["arty"]="SUB_PROJECT=arty verilog"
-mapping["vcu118"]="SUB_PROJECT=vcu118 verilog"
diff --git a/.circleci/do-rtl-build.sh b/.circleci/do-rtl-build.sh
deleted file mode 100755
index 3a537ea3..00000000
--- a/.circleci/do-rtl-build.sh
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/bash
-
-# create the different verilator builds
-# usage:
-#   do-rtl-build.sh <make command string> sim
-#     run rtl build for simulations and copy back results
-#   do-rtl-build.sh <make command string> fpga
-#     run rtl build for fpga and don't copy back results
-
-# turn echo on and error on earliest command
-set -ex
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-# call clean on exit
-trap clean EXIT
-
-cd $LOCAL_CHIPYARD_DIR
-./scripts/init-submodules-no-riscv-tools.sh
-./scripts/init-fpga.sh
-
-# set stricthostkeychecking to no (must happen before rsync)
-run "echo \"Ping $SERVER\""
-
-clean
-
-# copy over riscv/esp-tools, and chipyard to remote
-run "mkdir -p $REMOTE_CHIPYARD_DIR"
-copy $LOCAL_CHIPYARD_DIR/ $SERVER:$REMOTE_CHIPYARD_DIR
-
-run "cp -r ~/.ivy2 $REMOTE_WORK_DIR"
-run "cp -r ~/.sbt  $REMOTE_WORK_DIR"
-
-TOOLS_DIR=$REMOTE_RISCV_DIR
-LD_LIB_DIR=$REMOTE_RISCV_DIR/lib
-
-if [ $1 = "group-accels" ]; then
-    export RISCV=$LOCAL_ESP_DIR
-    export LD_LIBRARY_PATH=$LOCAL_ESP_DIR/lib
-    export PATH=$RISCV/bin:$PATH
-    GEMMINI_SOFTWARE_DIR=$LOCAL_SIM_DIR/../../generators/gemmini/software/gemmini-rocc-tests
-    cd $LOCAL_SIM_DIR/../../generators/gemmini/software
-    git submodule update --init --recursive gemmini-rocc-tests
-    cd gemmini-rocc-tests
-    ./build.sh
-
-    TOOLS_DIR=$REMOTE_ESP_DIR
-    LD_LIB_DIR=$REMOTE_ESP_DIR/lib
-    run "mkdir -p $REMOTE_ESP_DIR"
-    copy $LOCAL_ESP_DIR/ $SERVER:$REMOTE_ESP_DIR
-else
-    run "mkdir -p $REMOTE_RISCV_DIR"
-    copy $LOCAL_RISCV_DIR/ $SERVER:$REMOTE_RISCV_DIR
-fi
-
-# choose what make dir to use
-case $2 in
-    "sim")
-        REMOTE_MAKE_DIR=$REMOTE_SIM_DIR
-        ;;
-    "fpga")
-        REMOTE_MAKE_DIR=$REMOTE_FPGA_DIR
-        ;;
-esac
-
-# enter the verilator directory and build the specific config on remote server
-run "export RISCV=\"$TOOLS_DIR\"; \
-     make -C $REMOTE_MAKE_DIR clean;"
-
-read -a keys <<< ${grouping[$1]}
-
-# need to set the PATH to use the new verilator (with the new verilator root)
-for key in "${keys[@]}"
-do
-    run "export RISCV=\"$TOOLS_DIR\"; \
-         export LD_LIBRARY_PATH=\"$LD_LIB_DIR\"; \
-         export PATH=\"$REMOTE_VERILATOR_DIR/bin:\$PATH\"; \
-         export VERILATOR_ROOT=\"$REMOTE_VERILATOR_DIR\"; \
-         export COURSIER_CACHE=\"$REMOTE_WORK_DIR/.coursier-cache\"; \
-         make -j$REMOTE_MAKE_NPROC -C $REMOTE_MAKE_DIR FIRRTL_LOGLEVEL=info JAVA_TOOL_OPTIONS=\"$REMOTE_JAVA_OPTS\" SBT_OPTS=\"$REMOTE_SBT_OPTS\" ${mapping[$key]}"
-done
-
-run "rm -rf $REMOTE_CHIPYARD_DIR/project"
-
-# choose to copy back results
-if [ $2 = "sim" ]; then
-    # copy back the final build
-    mkdir -p $LOCAL_CHIPYARD_DIR
-    copy $SERVER:$REMOTE_CHIPYARD_DIR/ $LOCAL_CHIPYARD_DIR
-fi
diff --git a/.circleci/install-verilator.sh b/.circleci/install-verilator.sh
deleted file mode 100755
index 2170768a..00000000
--- a/.circleci/install-verilator.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/bash
-
-# move verilator to the remote server
-
-# turn echo on and error on earliest command
-set -ex
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-# clean older directories (delete prior directories related to this branch also)
-run_script $LOCAL_CHIPYARD_DIR/.circleci/clean-old-files.sh $CI_DIR
-run "rm -rf $REMOTE_PREFIX*"
-
-# set stricthostkeychecking to no (must happen before rsync)
-run "echo \"Ping $SERVER\""
-
-run "git clone http://git.veripool.org/git/verilator $REMOTE_VERILATOR_DIR; \
-     cd $REMOTE_VERILATOR_DIR; \
-     git checkout $VERILATOR_VERSION; \
-     autoconf; \
-     export VERILATOR_ROOT=$REMOTE_VERILATOR_DIR; \
-     ./configure; \
-     make -j$REMOTE_MAKE_NPROC;"
diff --git a/.circleci/run-firesim-scala-tests.sh b/.circleci/run-firesim-scala-tests.sh
deleted file mode 100755
index 022894f2..00000000
--- a/.circleci/run-firesim-scala-tests.sh
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/bash
-
-# create the different verilator builds
-# argument is the make command string
-
-# turn echo on and error on earliest command
-set -ex
-
-# get shared variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-# call clean on exit
-trap clean EXIT
-
-# Directory locations for handling firesim-local installations of libelf/libdwarf
-# This would generally be handled by build-setup.sh/firesim-setup.sh
-firesim_sysroot=lib-install
-local_firesim_sysroot=$LOCAL_FIRESIM_DIR/$firesim_sysroot
-remote_firesim_sysroot=$REMOTE_FIRESIM_DIR/$firesim_sysroot
-
-cd $LOCAL_CHIPYARD_DIR
-./scripts/init-submodules-no-riscv-tools.sh
-cd $LOCAL_CHIPYARD_DIR/sims/firesim/sim/firesim-lib/src/main/cc/lib
-git submodule update --init elfutils libdwarf
-cd $LOCAL_CHIPYARD_DIR/sims/firesim
-mkdir -p $local_firesim_sysroot
-./scripts/build-libelf.sh $local_firesim_sysroot
-./scripts/build-libdwarf.sh $local_firesim_sysroot
-cd $LOCAL_CHIPYARD_DIR
-
-make -C $LOCAL_CHIPYARD_DIR/tools/dromajo/dromajo-src/src
-
-# set stricthostkeychecking to no (must happen before rsync)
-run "echo \"Ping $SERVER\""
-
-clean
-
-# copy over riscv/esp-tools, and chipyard to remote
-run "mkdir -p $REMOTE_CHIPYARD_DIR"
-run "mkdir -p $REMOTE_RISCV_DIR"
-copy $LOCAL_CHIPYARD_DIR/ $SERVER:$REMOTE_CHIPYARD_DIR
-copy $LOCAL_RISCV_DIR/ $SERVER:$REMOTE_RISCV_DIR
-
-run "cp -r ~/.ivy2 $REMOTE_WORK_DIR"
-run "cp -r ~/.sbt  $REMOTE_WORK_DIR"
-
-TOOLS_DIR=$REMOTE_RISCV_DIR
-
-LD_LIB_DIR=$remote_firesim_sysroot/lib:$REMOTE_RISCV_DIR/lib
-
-# Run Firesim Scala Tests
-run "export RISCV=\"$TOOLS_DIR\"; \
-     export LD_LIBRARY_PATH=\"$LD_LIB_DIR\"; \
-     export FIRESIM_ENV_SOURCED=1; \
-     export PATH=\"$REMOTE_VERILATOR_DIR/bin:\$PATH\"; \
-     export VERILATOR_ROOT=\"$REMOTE_VERILATOR_DIR\"; \
-     export COURSIER_CACHE=\"$REMOTE_WORK_DIR/.coursier-cache\"; \
-     make -C $REMOTE_FIRESIM_DIR JAVA_TOOL_OPTIONS=\"$REMOTE_JAVA_OPTS\" SBT_OPTS=\"$REMOTE_SBT_OPTS\" testOnly ${mapping[$1]}"
diff --git a/.circleci/run-tests.sh b/.circleci/run-tests.sh
deleted file mode 100755
index 461843fd..00000000
--- a/.circleci/run-tests.sh
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/bin/bash
-
-# run the different tests
-
-# turn echo on and error on earliest command
-set -ex
-
-# get remote exec variables
-SCRIPT_DIR="$( cd "$( dirname "$0" )" && pwd )"
-source $SCRIPT_DIR/defaults.sh
-
-run_bmark () {
-    make run-bmark-tests-fast -j$CI_MAKE_NPROC -C $LOCAL_SIM_DIR $@
-}
-
-run_asm () {
-    make run-asm-tests-fast -j$CI_MAKE_NPROC -C $LOCAL_SIM_DIR $@
-}
-
-run_both () {
-    run_bmark $@
-    run_asm $@
-}
-
-run_tracegen () {
-    make tracegen -C $LOCAL_SIM_DIR $@
-}
-
-# TODO BUG: the run-binary command forces a rebuild of the simulator in CI
-#           instead, directly run the simulator binary
-case $1 in
-    chipyard-rocket)
-        run_bmark ${mapping[$1]}
-        ;;
-    chipyard-dmirocket)
-        run_bmark ${mapping[$1]}
-        ;;
-    chipyard-lbwif)
-        run_bmark ${mapping[$1]}
-        ;;
-    chipyard-boom)
-        run_bmark ${mapping[$1]}
-        ;;
-    chipyard-hetero)
-        run_bmark ${mapping[$1]}
-        ;;
-    rocketchip)
-        run_bmark ${mapping[$1]}
-        ;;
-    chipyard-hwacha)
-        export RISCV=$LOCAL_ESP_DIR
-        export LD_LIBRARY_PATH=$LOCAL_ESP_DIR/lib
-        export PATH=$RISCV/bin:$PATH
-        make run-rv64uv-p-asm-tests -j$CI_MAKE_NPROC -C $LOCAL_SIM_DIR ${mapping[$1]}
-        ;;
-    chipyard-gemmini)
-        export RISCV=$LOCAL_ESP_DIR
-        export LD_LIBRARY_PATH=$LOCAL_ESP_DIR/lib
-        export PATH=$RISCV/bin:$PATH
-        GEMMINI_SOFTWARE_DIR=$LOCAL_SIM_DIR/../../generators/gemmini/software/gemmini-rocc-tests
-        rm -rf $GEMMINI_SOFTWARE_DIR/riscv-tests
-        cd $LOCAL_SIM_DIR
-        $LOCAL_SIM_DIR/simulator-chipyard-GemminiRocketConfig $GEMMINI_SOFTWARE_DIR/build/bareMetalC/aligned-baremetal
-        $LOCAL_SIM_DIR/simulator-chipyard-GemminiRocketConfig $GEMMINI_SOFTWARE_DIR/build/bareMetalC/raw_hazard-baremetal
-        $LOCAL_SIM_DIR/simulator-chipyard-GemminiRocketConfig $GEMMINI_SOFTWARE_DIR/build/bareMetalC/mvin_mvout-baremetal
-        ;;
-    chipyard-sha3)
-        export RISCV=$LOCAL_ESP_DIR
-        export LD_LIBRARY_PATH=$LOCAL_ESP_DIR/lib
-        export PATH=$RISCV/bin:$PATH
-        (cd $LOCAL_CHIPYARD_DIR/generators/sha3/software && ./build.sh)
-        $LOCAL_SIM_DIR/simulator-chipyard-Sha3RocketConfig $LOCAL_CHIPYARD_DIR/generators/sha3/software/tests/bare/sha3-rocc.riscv
-        ;;
-    chipyard-streaming-passthrough)
-        make -C $LOCAL_CHIPYARD_DIR/tests
-        $LOCAL_SIM_DIR/simulator-chipyard-StreamingPassthroughRocketConfig $LOCAL_CHIPYARD_DIR/tests/streaming-passthrough.riscv
-        ;;
-    chipyard-streaming-fir)
-        make -C $LOCAL_CHIPYARD_DIR/tests
-        $LOCAL_SIM_DIR/simulator-chipyard-StreamingFIRRocketConfig $LOCAL_CHIPYARD_DIR/tests/streaming-fir.riscv
-        ;;
-    chipyard-spiflashread)
-        make -C $LOCAL_CHIPYARD_DIR/tests
-        make -C $LOCAL_SIM_DIR ${mapping[$1]} BINARY=$LOCAL_CHIPYARD_DIR/tests/spiflashread.riscv SIM_FLAGS="+spiflash0=${LOCAL_CHIPYARD_DIR}/tests/spiflash.img" run-binary
-        ;;
-    chipyard-spiflashwrite)
-        make -C $LOCAL_CHIPYARD_DIR/tests
-        make -C $LOCAL_SIM_DIR ${mapping[$1]} BINARY=$LOCAL_CHIPYARD_DIR/tests/spiflashwrite.riscv SIM_FLAGS="+spiflash0=${LOCAL_CHIPYARD_DIR}/tests/spiflash.img" run-binary
-        [[ "`xxd $LOCAL_CHIPYARD_DIR/tests/spiflash.img  | grep 1337\ 00ff\ aa55\ face | wc -l`" == "6" ]] || false
-        ;;
-    tracegen)
-        run_tracegen ${mapping[$1]}
-        ;;
-    tracegen-boom)
-        run_tracegen ${mapping[$1]}
-        ;;
-    chipyard-cva6)
-        make run-binary-fast -C $LOCAL_SIM_DIR ${mapping[$1]} BINARY=$RISCV/riscv64-unknown-elf/share/riscv-tests/benchmarks/multiply.riscv
-        ;;
-    chipyard-sodor)
-        run_asm ${mapping[$1]}
-        ;;
-    chipyard-ibex)
-        run_bmark ${mapping[$1]} #TODO: Find 32-bit test
-        ;;
-    chipyard-nvdla)
-        make -C $LOCAL_CHIPYARD_DIR/tests
-        make -C $LOCAL_SIM_DIR ${mapping[$1]} BINARY=$LOCAL_CHIPYARD_DIR/tests/nvdla.riscv run-binary
-        ;;
-    icenet)
-        make run-binary-fast BINARY=none -C $LOCAL_SIM_DIR ${mapping[$1]}
-        ;;
-    testchipip)
-        make run-binary-fast BINARY=none -C $LOCAL_SIM_DIR ${mapping[$1]}
-        ;;
-    *)
-        echo "No set of tests for $1. Did you spell it right?"
-        exit 1
-        ;;
-esac