prolong3 改为先算实际 stencil 窗口；只有窗口触及对称边界时才走全域 symmetry_bd，否则只复制必需窗口。restrict3 同样改成窗口判定，无触边时仅填 ii/jj/kk 必需窗口。

AMSS_NCKU_source/prolongrestrict_cell.f90

@@ -1957,7 +1957,9 @@
   real*8 :: tmp_yz(extc(1), 6)      ! 存储整条 X 线上 6 个 Y 轴偏置的 Z 向插值结果
   real*8 :: tmp_xyz_line(-2:extc(1))   ! 包含 X 向 6 点模板访问所需下界
   real*8 :: v1, v2, v3, v4, v5, v6
-  integer :: ic, jc, kc, ix_offset,ix,iy,iz,jc_min,jc_max,ic_min,ic_max
+  integer :: ic, jc, kc, ix_offset,ix,iy,iz,jc_min,jc_max,ic_min,ic_max,kc_min,kc_max
+  integer :: i_lo, i_hi, j_lo, j_hi, k_lo, k_hi
+  logical :: need_full_symmetry
   real*8 :: res_line
   real*8 :: tmp_z_slab(-2:extc(1), -2:extc(2))  ! 包含 Y/X 向模板访问所需下界
   if(wei.ne.3)then
@@ -2062,20 +2064,35 @@
      endif
   enddo
 
-  maxcx = maxval(cix(imino:imaxo))
+  ic_min = minval(cix(imino:imaxo))
-  maxcy = maxval(ciy(jmino:jmaxo))
+  ic_max = maxval(cix(imino:imaxo))
-  maxcz = maxval(ciz(kmino:kmaxo))
+  jc_min = minval(ciy(jmino:jmaxo))
+  jc_max = maxval(ciy(jmino:jmaxo))
+  kc_min = minval(ciz(kmino:kmaxo))
+  kc_max = maxval(ciz(kmino:kmaxo))
+
+  maxcx = ic_max
+  maxcy = jc_max
+  maxcz = kc_max
   if(maxcx+3 > extc(1) .or. maxcy+3 > extc(2) .or. maxcz+3 > extc(3))then
      write(*,*)"error in prolong"
      return
   endif
 
-  call symmetry_bd(3,extc,func,funcc,SoA)
+  i_lo = ic_min - 2
+  i_hi = ic_max + 3
+  j_lo = jc_min - 2
+  j_hi = jc_max + 3
+  k_lo = kc_min - 2
+  k_hi = kc_max + 3
+  need_full_symmetry = (i_lo < 1) .or. (j_lo < 1) .or. (k_lo < 1)
+  if(need_full_symmetry)then
+     call symmetry_bd(3,extc,func,funcc,SoA)
+  else
+     funcc(i_lo:i_hi,j_lo:j_hi,k_lo:k_hi) = func(i_lo:i_hi,j_lo:j_hi,k_lo:k_hi)
+  endif
+
      ! 对每个 k（pz, kc 固定）预计算 Z 向插值的 2D 切片
-jc_min = minval(ciy(jmino:jmaxo))
-jc_max = maxval(ciy(jmino:jmaxo))
-ic_min = minval(cix(imino:imaxo))
-ic_max = maxval(cix(imino:imaxo))
 
 do k = kmino, kmaxo
     pz = piz(k); kc = ciz(k)
@@ -2356,6 +2373,8 @@ end do
   real*8 :: tmp_x_line(-1:extf(1))
   integer :: fi, fj, fk, ii, jj, kk
   integer :: fi_min, fi_max, ii_lo, ii_hi
+  integer :: fj_min, fj_max, fk_min, fk_max, jj_lo, jj_hi, kk_lo, kk_hi
+  logical :: need_full_symmetry
 
   if(wei.ne.3)then
      write(*,*)"prolongrestrict.f90::restrict3: this routine only surport 3 dimension"
@@ -2435,19 +2454,34 @@ end do
           stop
   endif
 
-  call symmetry_bd(2,extf,funf,funff,SoA)
-
   ! 仅计算 X 向最终写回所需的窗口：
   ! func(i,j,k) 只访问 tmp_x_line(fi-2:fi+3)
   fi_min = 2*(imino + lbc(1) - 1) - 1 - lbf(1) + 1
   fi_max = 2*(imaxo + lbc(1) - 1) - 1 - lbf(1) + 1
+  fj_min = 2*(jmino + lbc(2) - 1) - 1 - lbf(2) + 1
+  fj_max = 2*(jmaxo + lbc(2) - 1) - 1 - lbf(2) + 1
+  fk_min = 2*(kmino + lbc(3) - 1) - 1 - lbf(3) + 1
+  fk_max = 2*(kmaxo + lbc(3) - 1) - 1 - lbf(3) + 1
   ii_lo = fi_min - 2
   ii_hi = fi_max + 3
-  if(ii_lo < -1 .or. ii_hi > extf(1))then
+  jj_lo = fj_min - 2
-      write(*,*)"restrict3: invalid ii window",ii_lo,ii_hi
+  jj_hi = fj_max + 3
-      write(*,*)"imino,imaxo,lbc(1),lbf(1),extf(1) = ",imino,imaxo,lbc(1),lbf(1),extf(1)
+  kk_lo = fk_min - 2
+  kk_hi = fk_max + 3
+  if(ii_lo < -1 .or. ii_hi > extf(1) .or. &
+     jj_lo < -1 .or. jj_hi > extf(2) .or. &
+     kk_lo < -1 .or. kk_hi > extf(3))then
+      write(*,*)"restrict3: invalid stencil window"
+      write(*,*)"ii=",ii_lo,ii_hi," jj=",jj_lo,jj_hi," kk=",kk_lo,kk_hi
+      write(*,*)"extf=",extf
       stop
   endif
+  need_full_symmetry = (ii_lo < 1) .or. (jj_lo < 1) .or. (kk_lo < 1)
+  if(need_full_symmetry)then
+      call symmetry_bd(2,extf,funf,funff,SoA)
+  else
+      funff(ii_lo:ii_hi,jj_lo:jj_hi,kk_lo:kk_hi) = funf(ii_lo:ii_hi,jj_lo:jj_hi,kk_lo:kk_hi)
+  endif
 
 !~~~~~~> restriction start...
 do k = kmino, kmaxo